Telstra Australia APN Settings for iPhone/iPad & Android

Telstra is considered the biggest telecom operator in Australia. There are approximately 16 million Telstra users across Australia. Telstra offers the LTE speedier data connection for the users. In simple words, if you want to browse something, the browsing speed will be up to 100MB/sec. It is incredibly awesome. But, you need to configure the APN settings to use the network data.

Note: You can not use Telstra APN settings for ALDImobile, find ALDImobile APN settings here.

Telstra Network Frequencies keep varying countrywide. However, Telstra 3G Network frequency is UMTS 850 MHz, and Telstra 4G Network frequency is LTE Band 28 700. Furthermore, the maximum downloading speed is around 300 Mbps whereas; the maximum uploading speed is about 100 Mbps.

Table of Contents

Telstra MNC & MCC Values

505-01
505-11
505-71
505-72

Telstra has been providing the VoLTE (Voice over LTE) services since September 2015. It is using the following frequencies to provide this service.

LTE band 28 (700)
LTE band 3 (1800)
LTE band 7 (2600)

Telstra APN Settings for Cell phone and Tablet

APN is the short form of “Access Point Name” that is a setting for your Smartphone. A correct APN gives you access to the mobile internet. You need to configure the settings to use the network data package. Without it, you cannot browse anything and even cannot send/receive the MMS. So, follow the guide below to configure the APN Settings for Internet & MMS.

(I am going to list all of the Telstra APN Settings. But only a few among them will be compatible with your device. So, make sure, you have configured the right APN Settings. Here is it.

Telstra APN Settings for Internet & MMS

Category Settings
APN telstra.iph
MMSC http://mmsc.telstra.com:8002
MMSC Proxy 10.11.180
MMS proxy port 80
APN type default,supl,mms
Authentication type none

Telstra APN Settings for Internet

Category Settings
APN telstra.wap
APN type default,supl
Authentication type None

Telstra APN Settings for Internet Dongles

String Settings
APN telstra.internet
Dial number *99#
PDP type IP
Authentication type PAP

Make sure, you are typing the right string in the right box. The capital and small letters can also make a big difference. If you have to put the phrase “telstra.iph” in the MMS and Internet Settings, don’t try to put it as “TELSTRA.IPH” or “Telstra.iph,” etc. Put the correct string in the same case.

Telstra APN Settings for Android

If you are using Telstra on Android phone, you need to change the APN settings to acquire the network connectivity on it.  These settings are for Android 9 Pie.

Telstra APN Settings for Internet & MMS [For Android]

Find here the settings for internet and MMS. Follow the steps below to configure the settings for Internet & MMS in your Android phone.

Open the “Settings” of your phone.

Select “Connections” from the Settings and go to the “Mobile Networks” section.

Here, you need to select the “Access Point Names” to configure the settings.

On the right top corner of Window, you will see an option “Add.” Select this option to add the new settings for Telstra.

Category Settings
Name Telstra 1
APN telstra.wap
Proxy
Port
Username
Password
Server
MMSC
MMS proxy
MMS port
MCC 505
MNC 01
Authentication type None
APN type default,supl
APN protocol IPv4
APN roaming protocol IPv4
Bearer Unspecified
APN PPP phone number Not set

Telstra APN Settings for Internet [For Android]

Once again, you need to go to the Settings.

Here, open the “Connections” category where you need to select the “Mobile Networks.”

Now, select “Access Point Names” from here.

On the top right corner of the screen, you will see the option “Add.” Tap this option to add the new APN settings for the Internet. If any field is blank in the settings, I am listing below you also need to leave it blank.

Category Settings
Name Telstra 3
APN telstra.mms
Proxy
Port
Username
Password
Server
MMSC http://mmsc.telstra.com:8002
MMS proxy 10.1.1.180
MMS port 80
MCC 505
MNC 01
Authentication type None
APN type mms
APN protocol IPv4
APN roaming protocol IPv4
Bearer Unspecified
APN PPP phone number Not set

Once you have added the values in all the fields, restart the phone to apply the new APN settings.

Telstra APN Settings for MMS [For Android]

Category Settings
Name Telstra 3
APN telstra.mms
Proxy
Port
Username
Password
Server
MMSC http://mmsc.telstra.com:8002
MMS proxy 10.1.1.180
MMS port 80
MCC 505
MNC 11
Authentication type None
APN type mms
APN protocol IPv4
APN roaming protocol IPv4
Bearer Unspecified
APN PPP phone number Not set

Now restart your device to apply the new APN settings.

MCC-MNC values for Telstra

Below are the MCC-MNC values you can enter in the APN settings for Telstra.

505-01
505-11
505-71
505-72

Telstra APN Settings for Windows Phone

If you are using Telstra on a Windows phone, here are the APN settings for Windows 10.

Telstra APN Settings for Internet & MMS [Windows 10]

In your Windows phone, tap the “Apps list” and open “Settings.”

Select “Network & Wireless” category from here.

Tap the “Cellular & SIM” option in this category.

Now, select the SIM card you are using and tap “Properties” from the options.

Here, you will see the “Internet APN” category. Tap the option “Add an internet APN” to move ahead.

Now insert the values given below

Category Settings
Profile Name Telstra 2
APN telstra.iph
User name
Password
Type of sign-in info none
IP type IPv4
Enable Type your Mobile operator here
Proxy server (URL)
Proxy port

Tap to the SIM card option and select “Properties.”

Here, you will see the “MMS APN” category. Select the option “Add an MMS APN” and follow the strings given below.

Category Settings
Profile Name Telstra 2
APN telstra.iph
User name
Password
Type of sign-in info none
IP type IPv4
Proxy server (URL) 10.1.1.180
Proxy port 80
MMSC (URL): http://mmsc.telstra.com
MMSC port: 8002
Maximum MMS size (KB) 2048

Now tap “Save” to save the current changes. Reboot your phone to apply the settings.

Telstra APN Settings for Internet [Windows 10]

Category Settings
Profile Name Telstra 1
APN telstra.wap
User name
Password
Type of sign-in info none
IP type IPv4
Enable Replace it with your Mobile Operator
Proxy Server (URL):
Proxy port
MMSC port:
Maximum MMS size (KB) 2048

Tap the “Save” option to save all the settings.

Telstra APN Settings (2) for MMS [Windows 10]

Category Settings
Profile Name Telstra 3
APN telstra.mms
User name
Password
Type of sign-in info None
IP type IPv4
Proxy server (URL) 10.1.1.180
Proxy port 80
MMSC (URL): http://mmsc.telstra.com
MMSC port: 8002
Maximum MMS size (KB) 2048

Telstra APN Settings (3) for MMS [Windows 10]

Category Settings
Profile Name Telstra 3
APN Telstra.mms
User name
Password
Type of sign-in info None
IP type IPv4
Proxy server (URL) 10.1.1.180
Proxy port 80
MMSC (URL): http://mmsc.telstra.com
MMSC port: 8002
Maximum MMS size (KB) 2048

Telstra APN Settings for iOS Devices

If you are using an iOS device, you need to configure the APN Settings by following the steps below. These are the APN settings for iOS 12.

Telstra APN Settings for Internet & MMS [iOS Devices]

Open the “Settings” in your iOS device and select the “Cellular” category.

Select the “Cellular Data Options” category from here.

Tap the “Cellular Data Network” from the available options.

Select “Cellular Data” and add the following information here.

Category Settings
APN telstra.iph
Username
Password

In the LTE Setup (Optional), you need to leave the APN, Username and Password fields Blank as they are.

Now move to the MMS section, enter the following information as given below.

Telstra APN Settings for MMS [iOS Devices]

Category Settings
APN telstra.iph
Username
Password
MMSC http://mmsc.telstra.com:8002
MMS Proxy 10.1.1.180
MMS Max Message Size 1048576
MMS UA Prof URL http://www.apple.com/mms/uaprof.rdf

Now save the APN settings by pressing the “Home” button. Restart your iOS device to apply the new APN settings.

Telstra APN Settings for Internet [iOS Devices]

Category Settings
APN telstra.wap
Username
Password

Now, move to the LTE Setup (Optional) section and leave the APN, Username and Password fields blank.

Go to the MMS section and enter the following information in the fields.

Category Settings
APN telstra.wap
Username
Password
MMSC
MMS Proxy
MMS Max Message Size 1048576
MMS UA Prof URL http://www.apple.com/mms/uaprof.rdf

Now, press the Home button to save the settings and reboot the iOS device to apply the changes.

Telstra APN Settings for MMS [iOS Devices]

Category Settings
APN telstra.mms
Username
Password

In the LTE Setup (Optional), you should not enter a value in the APN, Username and Password fields.

Go to the MMS section and enter the following information in the fields.

Category Settings
APN telstra.wap
Username
Password
MMSC http://mmsc.telstra.com:8002
MMS Proxy 10.1.1.180
MMS Max Message Size 1048576
MMS UA Prof URL http://www.apple.com/mms/uaprof.rdf

Telstra APN Settings for Firefox Operating System

If you are using a device running on Firefox OS, here are the Telstra APN Settings for Internet and MMS. Follow the instructions below carefully. Insert the same case the same value to an accurate field to get connected.

Telstra APN Settings for Internet & MMS [Firefox OS]

You need to open the “Settings” app and select “Cellular & Data” category from here.

Tap to “Enable” the Data connection.

Scroll down the options and select “Data Settings” from the list. Now add the following information in the given fields.

Category Settings
APN telstra.iph
Username
Password

Now tap the option “OK” to save it.

Tap the “Cellular & Data” option and select “Message Settings” from here.

Category Settings
APN telstra.iph
Identifier
Password
MMSC http://mmsc.telstra.com:8002
MMSC Proxy 10.11.180
MMS proxy port 80

Telstra APN Settings for Internet [Firefox OS]

Go to the “Settings” in your Firefox device and select “Cellular & Data” category from here.

Tap the “Data Connection” to turn it on.

Move downward in the list and select “Data Settings” option from here.

Now add the following information.

Category Settings
APN telstra.wap
Username
Password

Tap the option “OK” to save the changes.

Telstra APN Settings for MMS [Firefox OS]

Category Settings
APN telstra.mms
Identifier
Password
MMSC http://mmsc.telstra.com:8002
MMSC Proxy 10.11.180
MMS proxy port 80

Telstra APN Settings (2) for MMS [Firefox OS]

Category Settings
APN Telstra.mms
Identifier
Password
MMSC http://mmsc.telstra.com:8002
MMSC Proxy 10.11.180
MMS proxy port 80

Once you have inserted all the values, press “OK” to save the settings.

Telstra APN Settings for Ubuntu OS

The users of Telstra can find below the APN Settings if they are using the Ubuntu OS.

Telstra APN Settings for Internet & MMS [Ubuntu OS]

Go to the “Network” category. Select the “Cellular Settings” from here.

Now, click the “Carrier & APN” category from here. Click the “Cellular Data” option to Enable it.

Go to the “APN” and create a “Custom Internet APN” by using the option. Now add the following information here.

Category Settings
Internet APN telstra.iph
Username
Password
Authentication none
Protocol IPv4

Select the “Activate” option to enable the settings you have entered.

Again come to the APN section and create a “Custom MMS APN” by using the option there. Now insert the following information in the fields.

Category Settings
Internet APN telstra.iph
MMSC http:mmsc.telstra.com:8002
Proxy 10.1.1.180
Proxy Port 80
Username
Password
Authentication none
Protocol IPv4

Telstra APN Settings for Internet [Ubuntu OS]

Category Settings
Internet APN telstra.wap
Username
Password
Authentication none
Protocol IPv4

Select the option “Activate” to save the changes.

Telstra APN Settings for MMS [Ubuntu OS]

Category Settings
Internet APN telstra.mms
MMSC http:mmsc.telstra.com:8002
Proxy 10.1.1.180
Proxy Port 80
Username
Password
Authentication none
Protocol IPv4

Telstra APN Settings (2) for MMS [Ubuntu OS]

Category Settings
Internet APN Telstra.mms
MMSC http:mmsc.telstra.com:8002
Proxy 10.1.1.180
Proxy Port 80
Username
Password
Authentication None
Protocol IPv4

Telstra APN Settings for BlackBerry OS

The people using Telstra network services on a BlackBerry can configure the APN Settings for Internet and MMS by using the information below.

Telstra APN Settings for Internet & MMS [BlackBerry OS]

On the Home screen, you need to swipe down to bring “Settings” in the front.

Select the “Network Connections” category from here.

Tap the option “Mobile Network.”

Here, you will see the option “APN” at the bottom of the window. Select this option to create new APN.

Category Settings
APN telstra.iph
Identifier
Password

Select the option “Save” to save the changes.

Go to the main menu and open the “Text Messages” app. On the top, there is a three-dotted icon that shows you the Settings. Select it and tap “Text Messages” from here.

Select the option “MMS” here and tap the “Advanced” option. Now, type the following information here.

Category Settings
APN telstra.iph
MMSC URL http://mmsc.telstra.com:8002
Proxy URL 10.1.1.180:80

Telstra APN Settings for Internet [BlackBerry OS]

Category Settings
APN telstra.wap
Identifier
Password

Telstra APN Settings for MMS [BlackBerry OS]

Category Settings
APN telstra.mms
MMSC URL http://mmsc.telstra.com:8002
Proxy URL 10.1.1.180:80

Telstra APN Settings (2) for MMS [BlackBerry OS]

Category Settings
APN Telstra.mms
MMSC URL http://mmsc.telstra.com:8002
Proxy URL 10.1.1.180:80
Categories AU

Leave a Comment