InterNode is an Australian Telecom that also provides internet services. The company was founded in 1991 in South Australia. It provides the VoIP, ADSL, NBN broadband internet services, InterNode Business Connect, and many other services.
InterNode brings a wide range of services. If you are an InterNode internet user, you need to add some APN settings to your handset to use the internet and MMS services.
InterNode offers you the maximum uploading speed up to 51 Mbps and the maximum downloading speed up to 150.8 Mbps.
INTERNODE Network Frequencies vary countrywide. INTERNODE 3G Network maximum and minimum frequencies are UMTS 2100 MHz and UMTS 900. In the same way, INTERNODE 4G Network maximum and minimum frequencies are LTE Band 3 1800, LTE Band 40 2300. In some regions, the maximum 4G frequency varies and is noted as LTE Band 1 2100.
INTERNODE MNC & MCC Values
505-02
Table of Contents
INTERNODE APN Settings for Internet & MMS
APN, the short form of “Access Point Name” is an essential setting you need to add in the handset to acquire internet. You cannot access the internet if you are not using the prescribed APN settings on your phone. So, it is unavoidable to get the APN settings for your device. Every device needs to be configured with different APN settings to access the internet.
Here, you will find all of the INTERNODE APN Settings. But all of them will not work with your handset. Try them and enjoy InterNode internet services. So, make sure, you have configured the right APN Settings. Here these are.
Category | Settings |
---|---|
APN | internode |
MMSC | default,supl |
You need to be very careful while adding the settings. The letters case and space can make a big difference in the settings. For example, if your settings include “default,supl” type it as it is. Don’t try to type “Default,supl” or “default, supl.”
INTERNODE APN Settings for Android Devices
If you are using an Android handset, you need to add the APN settings compatible with it. If you add different settings, it will not access the internet. Here, I am going to list the APN Settings for Android 9 Pie. If you are using another version of Android OS, contact your ISP to receive the relevant settings.
INTERNODE APN Settings for Internet & MMS [For Android]
Follow the instructions below to configure the APN Settings for Internet on your Android device.
Go to the “Settings” on your phone.
Select the “Connections” category in the Settings.
Now tap the option “Mobile Network” to proceed.
Here, select the “Access Point Names” category and tap the “Add” to include new APN Settings for INTERNODE. If your device already has already a set value for Name as INTERNODE 1, don’t change it. Move below to add other settings. If the “Name” field is empty, then add the INTERNODE 1 here. Follow the instructions below to add new APN Settings for Android 9 Pie.
Category | Settings |
---|---|
Name | InterNode 1 |
APN | Internode |
Proxy | |
Port | |
Username | |
Password | |
Server | |
MMSC | |
MMS proxy | |
MMS port | |
MCC | 505 |
MNC | 02 |
Authentication type | |
APN type | default,supl |
APN protocol | IPv4 |
APN roaming protocol | IPv4 |
Bearer | Unspecified |
APN PPP phone number | Not set |
INTERNODE APN Settings for Windows OS
If you are using a Windows phone or tablet, you should configure the relevant APN Settings to access the internet. The above-given APN Settings for Android will not work on it. Here are the APN Settings for your Windows phone or tablet. These settings are for Microsoft Windows 10. If you are using a device with Windows 7, 8 or XP, contact to your ISPR to get APN Settings for it.
INTERNODE APN Settings for Internet [Windows 10]
Go to the “Settings” in the list of Apps on your device.
Here, select the option “Network & Wireless.”
In the category “Cellular & SIM,” tap the “SIM card” you are using.
Now, select the “Properties” option for your SIM card.
Here, you will see the “Internet APN” category. Select this category and tap “Add an Internet APN” option.
Now, a new page for settings will open. Type the following information here.
Category | Settings |
---|---|
Profile Name | InterNode 1 |
APN | internode |
User name | |
Password | |
Type of sign-in info | |
IP type | IPv4 |
Enable | Type your Mobile operator here |
Proxy server (URL) | |
Proxy port |
Tap the option “Save” to apply the changes.
INTERNODE APN Settings for iOS Devices
If you are using iOS Device, you need to configure different APN Settings to access the internet on your device. The APN Settings for Windows or Android will not work for iOS devices. So, here are the APN settings for iOS 12.
INTERNODE APN Settings for Internet [iOS Devices]
In your iOS device, you need to tap the “Settings” and select the “Cellular” category from the list.
Make sure the “Mobile Data” is enabled.
Now, select the “Cellular Data Options” from here and tap the “Cellular Data Network” option.
Press the “Cellular Data” category and insert the following options in the relevant locations as shown below.
Category | Settings |
---|---|
APN | internode |
Username | |
Password |
In the LTE Setup (Optional) category, you need to leave the “APN,” “Username” and “Password” blank as they are.
Now, move to the MMS section and add the following information here.
INTERNODE APN Settings for MMS [iOS Devices]
Category | Settings |
---|---|
APN | internode |
Username | |
Password | |
MMSC | |
MMS Proxy | |
MMS Max Message Size | 1048576 |
MMS UA Prof URL | http://www.apple.com/mms/uaprof.rdf |
Once you have finished the settings, press the “Home” key to save the settings. Return to the Home Page and reboot your iPhone to apply the settings.
INTERNODE APN Settings for Firefox OS
Some InterNode users are on Firefox devices. They need to add different APN settings that are relevant for their Firefox OS. Here are the APN Settings they should add to their handsets.
INTERNODE APN Settings for Internet [Firefox OS]
Select “Settings” in your handset and tap the “Cellular & Data” category.
Enable the data connection.
Select the “Data Settings” from the list of categories to add new APN Settings.
Category | Settings |
---|---|
APN | internode |
Identifier | |
Password |
Press “OK” to save the settings and reboot your device to apply the changes.
INTERNODE APN Settings for Ubuntu OS
Ubuntu users need to configure different APN Settings. If you are a Ubuntu user, you cannot use the APN Settings given for Android or Windows. Here are the relevant APN Settings for your Ubuntu device.
INTERNODE APN Settings for Internet [Ubuntu OS]
The users of Ubuntu devices need to follow the instructions below to add the APN settings.
Select the “Network” category.
Tap the option “Cellular Settings” here.
Tap “Carrier & APN” from the list.
Turn on the “Cellular data” from here.
Press “APN” and tap “Create Custom Internet APN” to add a new APN Settings for the internet.
Category | Settings |
---|---|
Internet APN | internode |
Username | |
Password | |
Authentication | |
Protocol | IPv4 |
Press the “Activate” option to save the changes and reboot your device to access the internet.
INTERNODE APN Settings for BlackBerry
The people using the INTERNODE internet services on BlackBerry OS, need to use the relevant APN Settings for their handset to access the internet and MMS services of InterNode. The APN Settings for Windows or Android will not work on the BlackBerry OS. Following are the settings for BlackBerry OS.
INTERNODE APN Settings for Internet [BlackBerry OS]
Swipe down on the Home on your device to access the “Settings” app.
Tap this app to move ahead.
In the categories, you need to select the “Network Connections” category.
Tap the option “Mobile Network and select “APN” from here.
Insert the following information here.
Category | Settings |
---|---|
APN | internode |
Username | |
Password |
Press the option “Save” to save the settings. Restart your device to access the internet.